Download the latest version here
You can check what version is currently installed on the "About" tab in the settings menu of the Cockpit App.
If your country or company is not allowing Youtube access, please click here.
Automatic Installation
All Elios systems currently running the Avionics Firmware 1.1 and Cockpit 1.1 are capable of automatically upgrading to version 1.2 provided that the tablet has access to the internet. Upon starting the Cockpit app, a notification will appear to inform you that a new version is available. Follow the instructions to install the new version of the App. The avionics firmware of the drone can be installed "over the air" if the ground controller and drone are also connected and powered on.
If you do not wish to connect your tablet to the internet, or if you are running firmware prior to V1.1, then the application and firmware can be upgraded offline through the process described below:
Tablet Application
Cockpit v1.2
Required files
- Cockpit apk v1.2 (md5: c67932d8a0e1cc32c8d5c3d909a59c5c)
How to upgrade
Elios
Avionics v1.2
Required files:
- Avionics binaries v1.2 (md5: 9c9dcc6dbfd118e5b7afe0b47ccb1502)
How to upgrade
Camera v0.11
The Camera firmware has not changed since the previous update, you will most likely not have to update it.
Required files
- Camera Binaries v0.11 (md5: 133f0ad6357d6d68f462dda0cf3c61e6)
How to upgrade
-
Download the Camera Firmware Binaries from the link below
-
Make sure the robot is not powered
-
Remove the Cam SD card from your robot and plug it to your computer
-
Copy the "FTWLC1.bin" into the Cam SD card's root
-
Plug the CAM SD card back in the robot
-
Power up the robot by plugging a battery
-
The CAM LED status shall blink blue for a moment and become solid green
-
Unplug the battery
-
Note: Works only with Avionics v1.0.2 or higher